Loading ...
Loading ...
Loading ...
ioubleshooting
PROBLEM POSSIBLE CAUSE WHAT TO DO
The display is There has been a power Reset the clock. (See page 24.)
showing "PF" failure.
A letter fol-
lowed by the
number shows
on the display
(for example
"E3", "FI")
The display is
showing "F5"
or "E3"
Press CANCEL/OFF. If the code
does not disappear, call for service.
(See "Requesting Assistance or
Service" on pages 50-51 .)
The power cord is not See Installation Instructions.
properly grounded.
The key pads Pads not touched long Hold down the pad a short time, and
do not operate enough, or not enough time allow a short time between each pad
between each pad pressed, entry.
The Control Lock has been Turn off the Control Lock by opening
set. the oven door, pressing and holding the
The Sabbath mode has been
set. ("SAb" appears on the
display.)
The range is not properly
grounded.
Control Lock pad for 5 seconds. (See
"Using the control lock" on page 20.)
Turn off the Sabbath mode by
opening the oven door, waiting up to
15 seconds, and pressing and
holding Number Pad 6 for 5 seconds.
Call an electrician to make sure the
outlet is well grounded, tf it is well
grounded, and the key pads still do
not operate, call a service technician.
If none of these items was causing your problem, see "Requesting Assistance" on page 50
or 51.
49
Loading ...
Loading ...
Loading ...