Loading ...
Loading ...
Loading ...
IM-DV5700-Rev5.0 - PAGE 3
INSTALLATION GUIDE
Location
• Choose a mounting location away from humid areas, water sources, appliances or any equipment
that can radiate heat.
• Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure that area
behind the wall mount stereo has a vent hole or if it is an enclosed box and has adequate room
around the rear of the unit for cooling.
• Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed
against the heat sink.
Installing the unit
• Before
installing the unit, connect the wiring temporarily and make sure the unit and the
system work properly.
• Fix the unit with screws according to following diagram.
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
4
1
5
7
9
6
8
7
8
9
10
8
9
2
3
4
2
1. UNIT (included)
2. MOUNTING BRACKET (included)
3. MOUNTING SCREW CM5X8mm x 4PCS
(included)
4. MOUNTING SCREW PA5X16mm x 4PCS
(included)
5. TRIM COVER (included)
6. REAR SUPPORT STRAP (included)
7. HEX NUT (included)
8. LOCK WASHER (included)
9. PLAIN WASHER (included)
10. TAPPING SCREW PA5X16mm
(included)
2
1
43
182.6mm
51mm
194.6mm
32.7mm
9.15mm
Release screw
Use only screwdriver with
appropriate torque, any other tools or excess torque will
damage the deck mechanism at users’ responsibility.
Recommended
cutout
Loading ...
Loading ...
Loading ...