Loading ...
Loading ...
Loading ...
46 47
OPERATION / USER
INSTRUCTIONS FOR USE
– Mod. static oven E3 with TFT touch
–
Cooking process
11:4 8
280
8m 02s
°C
AM
12:58
OFF
80
°c
30 40 50 60 70 80 90
8
8
0
0
0
11:48 AM
180
80
°C
°C
61°
9m 15s
12:58
11:48
280
9m 15s
°C
AM
12:58
11:48 AM
280
°C
10m
12:58
CAVITY SET
Once the cavity has been set (cooking function, temper-
ature and timer), conrm to start the preheating. At this
point the display will switch to the preheating mode
PREHEATING PHASE
There are four levels that allow you to monitor the pre-
heating process. The red part will gradually increase to
ll the display.
PREHEATING TERMINATED
When the set temperature is reached, the display will turn
red to indicate the end of the preheating phase, and the
start of the cooking phase.
If a cooking time has been set, the oven will automatically
switch off at the end of the time.
In case of no set cooking time it is possible to suspend
the cooking
and then nish it
PROBE TEMPERATURE SELECTOR
AND THEN FINISH IT
PREHEATING MODE WITH MEAT PROBE
OFF
INSTRUCTIONS FOR USE
– Mod. static oven E3 with TFT touch
–
Cooking function setting
11:48 AM
320
°C
11:48 AM
__:__
__:__
120
°c
50 100150 200250 300
0
1- Choose the cooking
function
Light (on or off)
Home (Return to home page)
2- Set the cooking temperature
3- 3- Set the cooking time and
the programmed start
4- Cavity selection
(only for multiple cavity models)
1b - Conrm the cooking
function
3d - Conrm the cooking
function
3a - Set the cooking time
3c - Set the start time
3b -Shows the time
of the cooking time
2a - There are two options for
setting the temperature:
- Scrolling the bar
- -With + or
-
2b - Conrm the
temperature
1a - Choose dry/wet
cooking
NOTE: Possible only in
certain cooking modes (see p.39)
11:4 8
AM
180
°F
80°F
180
°F
Loading ...
Loading ...
Loading ...