Loading ...
Loading ...
Loading ...
26 27
OPERATION / USER
Before the rst use
Induction
Adjuster (Knob)
Switching on a cooking
area
Switching off a cooking
area
Automatic switching off
of the device
*
Clean your hob with a damp cloth, and then dry the surface thoroughly.
There is a coil underneath each cooking zone which, when a pot is placed on it,
generates a variable electromagnetic eld, producing inductive power of a
ferromagnetic substance on the bottom of the pot. The end result is that the bottom of
the pot placed above the cooking zone is heated. The type of material constituting the
pot is fundamental:
- All pots with a ferromagnetic bottom are suitable (this can be veried with a magnet)
- The following pots should not be used: copper, stainless steel, aluminium, glass,
wood, ceramics
The knob does not show any numbers, the power level will be visible on the display.
Turn the relevant knob clockwise. On the hob display the set power level will appear
(from 1 to 9)
A cooking area is switched off by turning the respective knob counter clockwise. The
symbol [0] appears on the hob display for 15 seconds, then it disappears from the
display or changes to the symbol [H] if the cooking area is still hot.
The device switches off automatically if any conditions of excess temperature or errors
in the power supply occur.
INSTRUCTIONS FOR USE
– Use of the induction hob
Pot of magnetic material
Induction hob
Electromagnetic coil
The purpose of the booster function is to give more power to a determined area in order
to reduce the necessary cooking time. This function is activated by turning the knob
clockwise from position 0 (off) to the nal position (* g. A). After short acoustic signal,
the symbol [P] appears on the display, meaning that the booster function is activated.
The Booster function has a maximum duration of 10 minutes. The area concerned then
returns to level [9].The Booster function ends before this time when:
- a lower power level is set;
- the pan is removed;
- there is overheating of the appliance or of the heating area.
The Booster function has precedence over the “Heat-up” function. This means that, if
the heat-up function has been activated in an area at the time of activating the Booster
function, the heat-up function will be interrupted.
Each cooking area is designed to operate with specic pans for induction cooking,
having a diameter just smaller than the diameter of the chosen cooking area. If the pan
is not suitable, the display for the area shows the symbol indicating absence of the pan
(U) and the appliance does not start up. This prevents the appliance from
being switched on until a container is placed on the cooking area, or until a container
suitable for induction is used. If the container is removed during the operation, the area
is switched off. The duration of pan recognition is 10 minutes; if no suitable container is
used on the cooking area during this time, the area is switched off. The indication on the
display changes from the “pan absent” symbol to [-].
If the cooking area is still very hot, even though it is switched off, the symbol H appears
on the display. The Heat-up function, or quick heating, is available on each cooking
area. This means that for a well-dened time the cooking area works at maximum power
and at the end of this time the power is automatically brought to the set level. In this case
the duration depends on the selected power level.
The Heat-up function is activated by turning the knob counter clockwise from position
0 to the nal position (* g. A) for 2 seconds. After short acoustic signal, a letter [A] is
shown on the display for the correspondent area. After it has been activated you must
set a power level to continue cooking within 10 seconds; if this is not done, the Heat-up
function is interrupted.
The Key-lock function is useful if there are children at home. However, it is always
advisable for an adult to be pre- sent when the appliance is in operation. When the
Key-lock function is activated all the cooking areas are switched off and they cannot be
switched on accidentally
Booster function
Recognising the
presence of a pan
Residual heat indication
“HEAT-UP” function
Child-LOCK function
INSTRUCTIONS FOR USE
– Use of the induction hob
_
g. A
Loading ...
Loading ...
Loading ...