Loading ...
Loading ...
Loading ...
66
www.hasselblad.comH6X

USING PROFILES
1) From the main screen, click
PROFILES
on the grip and the
profile screen will appear.
2) Use the scroll bar to go through the list and highlight the
desired profile.
3) Press
Load
(AF button). The camera is now set according to
all the parameters stored according to the name.

CHANGING A PROFILE NAME
You can change a profile name (except ‘Default) at any time.
1) From the main screen, click
PROFILES
(ON.OFF button)
on the grip and the profile screen will appear.
2) Scroll through the list (front or rear scroll wheels) and
highlight the desired profile.
3) Press
Load
(AF button).
4) Click
PROFILES
(ON.OFF button) again.
5) Press
Save
(ISO/WB button) The Profile name screen is
then displayed where you can rename the profile to what
suits you (see under Image Info 4.2).
Tip
To quickly reset all profiles back to the original factory settings:
1. Remove battery.
2. Wait 5–10 seconds.
3. Replace the battery while keeping both the Menu and IS0/
WB buttons pressed.
Tip
Profiles and profile creation can be handled in Phocus in a very
intuitive way. The Camera Configuration is found in the menu:
Window / Camera Configuration
– for use with H5D sensor units only
.
ENTER
or
SAVE
AF
PROFILES
Loading ...
Loading ...
Loading ...