Loading ...
Loading ...
Loading ...
11
Changing the network connection
In the sections above, you chose how your radio would be connected to your network, using a
WiFi connection. From time to time, you may nd that you need to connect to different computer
networks. The Internet setup menu allows you to change your radio’s network settings, scan for
an alternative wireless network, or to manually congure the network parameters.
The steps outlined below describe how you can do this –see also the section ‘Network Proles’.
Conguring the radio to use an alternative WiFi connection
From the Network settings menu select ‘Network wizard’. This will present you with details of
any WiFi networks that are found. Scroll down the list using the Tuning Control Rotary to the
desired network name. Press Tuning Control Rotary to select this network. The radio will then
use its WiFi system to communicate with the network. Depending on the settings for the new
network you may need to enter an encryption key. By default the radio will then acquire an IP
address and other network settings from your router using DHCP.
Manual network conguration
If you do not wish to use DHCP for automatic conguration, or if your network is congured with
a hidden SSID, then you will need to enter some network settings manually. (Note – a hidden
SSID may prevent casual observers from detecting your network, but is not recommended
as a means of network security.)
1. From the radio Network settings menu, select ‘Manual settings’. You must then choose to connect
using ‘Wireless’ connections. Entering this option, there are as many as nine settings screens,
shown by the ‘1 of 9’ progress marker in the top right corner of the display.
2. The next menu asks whether you wish to use DHCP to configure your network parameters
(IP address, subnet mask, gateway address, etc). Unless you are familiar with networking and
related terminology, we recommend that you allow the use of DHCP. Choose ‘DHCP enable’
unless you need to specify the network details manually.
If you chose ‘DHCP enable’, please skip to step 6 in order to set up the wireless connection details.
If you chose ‘DHCP disable’ for either connection method, the next step is to set up the IP address.
Loading ...
Loading ...
Loading ...