Loading ...
Loading ...
Loading ...
Installation
48" Built-In Refrigerator
Step 6
Install 1/4"
door panels
If you are using 3/4" thick custom panels, SKIP THIS
STEP. See
Custom Panel Dimensions
pages for panel
sizes with ZKT48 trim kit and other kits. Refer to trim kit
installation instructions in this booklet.
If you are using the custom collar dispenser trim, order
ZWCD2 trim kit.
To install 1/4" door panels:
• Carefully remove the Phillips head screws from the
door handle top endcaps, if present.
• Open door to 90° stop. Remove the Phillips head
screws from the aluminum trim door handles. Retain
all screws.
18
• Attach 2" x 2" adhesive
backed foam pads to the
door. These fillers are
shipped with literature
package in snack pan.
• Slide panel into the door
trim.
• Replace door handles
and secure with original
screws.
• Again, check to be sure
unit is level and that
panels align with
cabinetry. Doors will not
close properly if unit is
not level.
• Check for noises caused
by incomplete alignment
(rubbing of panels, trim
or screws).
PRODUCT
INSTALLATION
Loading ...
Loading ...
Loading ...