Loading ...
Loading ...
Loading ...
17
Installation
48" Built-In Refrigerator
Step 3
Install
Side Panels
Step 4
Roll Refrigerator
Into Opening
Step 5
Level
Refrigerator
• Side panels are not required when the refrigerator is
installed into an enclosure. Skip this step if you are
installing in an enclosure.
• Side panels are required whenever the sides of the
refrigerator will be exposed and when installed
between frameless cabinets. See pages 3 and 4.
• Side panel installation will be determined by the
design of the side panel you have previously chosen.
• Side panels must be installed plumb.
• If you choose to use 1/4" side panels, they should be
inserted into the case trim as illustrated. Fasten the
panels to the refrigerator with Velcro strips (provided)
before setting refrigerator in place. See illustration A.
• 1/2" to 3/4" side panels are normally set into place and
fastened to adjacent cabinetry or the back wall before
rolling the refrigerator into the opening. See illustra-
tions B and C.
• Gently push refrigerator into opening with hands
against front corners. The cardboard protective pad
should be beneath the refrigerator.
• Roll refrigerator into the opening until it is flush with
adjacent cabinets.
Refrigerator door
Side
Panel
Refrigerator
Cabinet
Refrigerator
Cabinet
Refrigerator door
Illustration B
Illustration C
Illustration A
Cabinet
Refrigerator
Cabinet
Refrigerator door
1/2" to 3/4" Side Panels – Leading Edge Of Side Panel Is Flush
With Cabinet front. Fasten To The Back Wall Using A Cleat.
1/4" Side Panels – Insert End Of Side Panel Into Case Trim. Fasten
WIth Velcro Strips provided.
1/2" to 3/4" Side Panels – Recessed Front Edge of Side Panel.
Fasten To Adjacent Cabinet.
All models have 4-point leveling. The front is supported
by leveling legs, the rear is supported by wheels.
• To level the back of the refrigerator, turn the 7/16" hex
nut located above the front wheels. Turn to raise or
lower the refrigerator.
• For front leveling, use the 1-1/2" open-end wrench
(provided).
• Adjust carefully, the refrigerator should be level and
plumb with cabinetry, and should align with toekick
height.
Hex Nut Adjusts
Rear Wheels
Leveling Leg
PRODUCT
INSTALLATION
Loading ...
Loading ...
Loading ...