Loading ...
Loading ...
Loading ...
EN
47
Extended menu
www.bora.com
INFO All settings made in the demo mode are deleted
when the demo mode is deactivated. The system
and all settings are reset to the basic factory
settings. After that it is necessary to go through
the initial operation process (see Initial operation
chapter).
8.2.2 Menu item E: Display and button test
INFO The display and button test checks that all LEDs
in the operating panel are working.
Fig. 8.3 Menu item E: Display and button test
Activating the display and button test:
Tap the slider zone
All touch control and display areas of the operating
panel are shown at 50% brightness.
The power button, the navigation arrows and the menu
button are not included in the test (100% brightness).
Test options:
Tap a button
The symbol flashes at 100% brightness.
Swipe
The slider flashes at 100% brightness. The cooking zone
indicators and the multi-function display change their
values depending on the slider position.
Tap on a cooking zone
All indicators in the cooking zone flash at 100%
brightness.
Tap an additional cooking function
All additional cooking function symbols in the
corresponding cooking zone flash at 100% brightness.
Tap /
The corresponding button flashes red, then green, then
blue, once for each colour.
Tap / / / /
The corresponding button flashes 3x.
8.2 Extended menu items
INFO You can find exact instructions on using the menu
in the Menu chapter.
8.2.1 Menu item D: Demo mode
The system can be set to demo mode, which includes
all operating functions, but the heating function of the
cooktops is deactivated.
INFO The demo mode always simulates the following
cooktop combination:
left = CKFI
right = CKCH
INFO Cooktop extractor CKA2 is operated with a
full scope of functions exactly as it has been
configured.
Fig. 8.2 Menu item D: Activate the demo mode
Activating the demo mode:
tap the top slider segment
The top slider segment starts flashing and demo mode
activation starts (this can take up to 30 seconds).
The system is then automatically restarted and the
demo mode is activated.
INFO After switching on in demo mode,
d
E
%
0
is shown
in the multi-function display for 4 seconds.
Deactivating the demo mode:
Tap the bottom slider segment
The bottom slider segment starts flashing and demo
mode deactivation starts (this can take up to 30
seconds).
The system is then automatically restarted and the
demo mode is deactivated.
Loading ...
Loading ...
Loading ...