Loading ...
Loading ...
Loading ...
EN
43
Menu
www.bora.com
Update process
The update process has three stages. These three stages
are shown in the display by beige slider segments
(
). The currently active stage will flash. If a
stage in the process has been completed successfully,
the corresponding segment will stop flashing and will light
up green. The next stage in the process is started.
Fig. 7.10 Menu item 8: Software update process stages
INFO If the update is completed without errors, all three
segments will light up green. The system will then
be restarted automatically.
INFO The update has been completed successfully if
1
5
o
F
t
is shown in the display when the system
is restarted.
INFO If an error occurs during an update stage (the
corresponding slider segment lights up red), the
complete update process is terminated. An error
message appears in the operating panel display
(e.g.
E
1
2
3
; see Troubleshooting chapter).
7.3.8 Menu item 8:
System software update
INFO A system software update may be necessary for
troubleshooting.
INFO A USB stick with FAT32 formatting is needed
to save the update file. This USB stick must
be inserted into the USB port on the cooktop
extractor.
INFO A valid update file must be stored on the USB
stick. When the occasion arises, you can
obtain the update file from the BORA Service
department.
Starting the software update
Fig. 7.9 Menu item 8: Starting the software update
Insert the USB stick with the update file in the USB
port on the cooktop extractor.
Tap the slider
The software update is started.
The indicator for the first part of the update process
flashes.
Loading ...
Loading ...
Loading ...