Loading ...
Loading ...
Loading ...
EN
18
Appliance description
www.bora.com
4.2.5 Cooktop extractor functions
Power control
The power levels are adjusted via the operating panel
by tapping or swiping movements on the touch slider.
Alternatively the power levels can also be set using the
touch buttons and above and below the touch
slider.
Extractor power setting
When the power setting is activated, maximum extractor
power is available for a predefined time.
This power setting makes it possible to suction away high
levels of cooking vapours more quickly. After 10 minutes,
the power setting is automatically switched to power level
5.
Automatic extractor control
The extractor power level automatically adjusts itself
depending on the current cooktop settings. No manual
adjustment of the fan controls is necessary but it is
possible. The extractor power is automatically adjusted to
the highest power level used on all cooking zones that are
currently in use.
Function Power levels
Cooking level 1 2 3 4 5 6 7 8 9 P
Extractor power 3 3 3 4 4 4 5 5 5 P
Tab. 4.8 Extraction performance and cooking level
A change in the power level of a cooking zone results
in automatic adjustment of the extractor power after
a delay of 20 seconds on induction cooktops and 30
seconds on all other cooktops.
Automatic after-run
The cooktop extractor continues to run at a lower level
and switches off automatically after a defined time.
The duration of the after-run function can be set in the
menu (10 to 30 minutes). The default duration of the
after-run function is 20 minutes.
When the extractor is switched off at the end of
cooking the automatic after-run function is activated.
Once the automatic after-run period has lapsed the
cooktop extractor switches itself off.
INFO BORA expressly recommends use of the cooktop
extractor after-run function.
Recirculation filter service indicator
The cooktop extractor filter service indicator is
automatically activated when the end the activated
carbon filter service life is reached (only in recirculation
mode).
If the fan symbol lights up yellow and the multi-
function display
1
F
1
L
t
appears after switching on
the cooktop extractor, this is informing you that the
filter needs to be changed soon.
If the fan symbol lights up in signal red and the
error code
E
F
1
L
t
is shown in the multi-function
display after switching on the cooktop extractor, the
end of the filter service life has been reached and
the filter must be replaced (also see Cleaning and
Maintenance chapter).
INFO If the service life of the activated carbon filter is
exceeded, the correct functioning of the system
may be affected. It is still possible to use the
cooktop extractor, however, all warranty and
guarantee claims shall then be invalid for this
appliance.
INFO Regardless of the filter service indicator, the
components of the grease filter require regular
cleaning (see Cleaning and Maintenance chapter).
4.2.6 USB interface
INFO The USB port is only designed for updates or data
export and only has a power supply for these
processes. It is not possible to charge devices or
carry out other functions.
The system has a USB port. This port is only suitable for
mass storage devices (USB sticks). These USB sticks
must be formatted with the FAT32 data system.
4.2.7 Interface for external devices
The internal interface can be used for extended control
options. This has a Home In and a Home Out contact (see
Installation chapter).
The Home In contact can be used for the signal input
from external switch devices (e.g. window contact
switch).
The Home Out contact can be used to control external
installations.
4.3 Cooktops
INFO The cooktops CKFI, CKI, CKIW, CKCH, CKCB,
CKG and CKT are the variable components for
the BORA Classic 2.0 system and can only be
operated in conjunction with cooktop extractor
CKA2.
INFO You can see exactly which devices have been
installed in your system on the penultimate page
of the Operating instructions (see Identification
plates chapter).
Loading ...
Loading ...
Loading ...