Loading ...
Loading ...
Loading ...
-
~
ASSEMBLY INSTRUCTIONS
FIG 5 Work Stop
Knob Nut
Material
Support
Material Receiver
Support
Knob Screw
Knob Nut
Knob Nut
Knob Screw
Extension Rail Small Screw
Handle
Small Screw
ASSEMBLING RAPID CLAMP TOOL MOUNTS
Figure 6
1. Lay out all parts before starting the assembly process.
2. Select one (21) storage handle and position it where desired on one Rapid Clamp Tool
Mount rail. Run two (14) M8*20 Carriage bolts through the slots in the rail arms and attach
using a (17) M8 washer and nut. These handles are designed to store tools and can be
located where most convenient for the user by sliding it along the rail. See Figure 6. Tighten
the bolts and repeat for the second arm. The handles should face opposite directions
(outward) when the two completed arms are next to each other.
3. Attach the rapid clamp tool mounting rail to the lower portions of the rapid clamp tool mounts
base using one (14) M8*20 carriage bolts and one (15) M8 nuts, making sure that the
threaded portion is facing down toward the base (only hand tighten at this point).
4. To determine the best placement of the power tool on the Rapid Clamp Tool Mounting Rail,
place the rapid clamp tool mounts onto the body of the Miter Saw Stand and estimate the
tool’s center of gravity as it relates to the Miter Saw Stand. The rapid clamp tool mounting rail
can be adjusted forward and/or backward as needed, as long as its excess material doesn’t
affect workflow during the normal use
of the tool.
Page 8
Loading ...
Loading ...
Loading ...