Loading ...
Loading ...
Loading ...
-
ASSEMBLY INSTRUCTIONS
Read all assembly instructions completely before attempting assembly.
ATTACHING THE WHEELS
Figure 2
1. Extend the legs by depressing the leg lock levers.
2. Insert (8) axle through the mounting bracket and make sure the flat of the axle is inserted
into the flat of the inside of the mounting bracket.
3. Tighten (24) M10 nylon nut to the inner threaded portion of the axle.
4. Place (26) M10 washer then the (7) wheel onto the outer portion of the axle.
5. Place (26) M10 washer then (24) M10 nylon nut on the threaded portion of the outer portion
of the axle.
6. Repeat steps 2-5 for the other axle and wheel.
7. Ensure all (26) M10 nuts are tightened.
FIG 2 Leg Lock
Lever
Washer M10 Axle
Nut M10 Washer M12
Page 5
Loading ...
Loading ...
Loading ...