Loading ...
Loading ...
Loading ...
CAUTION:
Make sure that the jobsite is neat and clean before working
with the mats. Nails, screws, and other sharp debris can
damage the mats creating a potential shock hazard. Any
mats which become torn or otherwise damaged must be
discarded.
Ensure that the breaker supplying power to the heating mats
has been turned off before making electrical connections.
When installing any other materials on or near a heated
floor, ensure that no heating mats are punctured by nails,
screws, etc.
Not for use in wet areas, such as showers. This system is
only for use in areas considered dry locations by National
Electrical Code.
Do not install mats in walls, under walls or partitions, or
in locations where they will be covered by floor hugging
furniture or fixtures.
CAUTION:
Flooring materials must be rated for use with
electric floor warming system.
Do not place futons, beanbag chairs,
or similar furniture on heated floors.
Furniture must have a one inch clearance
from the floor.
Throughout the manual you will see Cautions and Notes. These notices highlight conditions, procedures, or other
information that require special attention to prevent damage to the mats, to your flooring, or possible injury. For
a safe and functional installation of the Peel & Stick Radiant Heat Film, read and follow these important safety
precautions. Failure to comply with these items may result in injury or damage to the mats.
This information must be read and understood by all technicians who will be working in the area of an installed
Peel & Stick Radiant Heat Film or main electrical systems. Failure to follow these guidelines may result in a risk
of electric shock or fire hazard.
Indicates precautions or procedures that should be followed
to prevent the possibility of fire.
Indicates precautions or procedures that should be followed
to prevent the possibility of electrical shock.
Indicates an item that you should pay special attention to. For
example, notes are used to highlight installation tips.
SAFETY INFORMATION
Installation & Owner’s Guide ii
Loading ...
Loading ...
Loading ...