Loading ...
Loading ...
Loading ...
Drolet-DG04905 19
PILOT FLAME
The pilot ame must to be always in a stable
condition, correctly touching the ame relavator to
keep the appliance lit on, if not, call your technical
service or your gas supplier
TO REMOVE MAIN BURNER FOR INSPECTION
AND CLEANING
NOTE: The stove and all components must be inspected
at least annually by a qualied service technician.
This should include the burner, heat exchanger, and
vent system. Be sure that the ow of combustion and
ventilation air are not obstructed.
1. Remove outer casing.
2. Disconnect gas supply to valve.
3. Remove the screws holding burner door to
heat exchanger and lift out complete burner.
4. After inspecting burner, place back into heat
exchanger. Be sure door gasket is not damaged
and will effect a proper seal or pilot outage will
occur.
5. Tighten screws holding burner door to heat
exchanger.
6. Connect gas supply back to the pilot.
7. Reassemble the casing.
Loading ...
Loading ...
Loading ...