Loading ...
Loading ...
Loading ...
Drolet-DG0490518
CAUTION: DO NOT TRY TO ADJUST HEATING LEVELS BY USING THE MANUAL SHUTOFF VALVE.
IMPORTANT:
• Do not dry clothes over the heater.
• Do not spray any aerosol near the heater when functioning. Do not store these elements near the
appliance.
• Do not touch grill to avoid burns.
• Avoid blocking air inlet and hot air outlet.
• Do not spill water over the heater as it may cause corrosion or damage.
• Do not touch vent cap while heater is operating, to avoid burns.
• If you smell gas, shut off control valve, open doors and windows and do not light any electrical items
near the heater. Call your Gas Supplier.
NOTE: It is normal for the new wall furnace to give some odor the rst time it is burned. This is due to the curing
of the paint and any undetected oil from the manufacturing process. It is recommended to burn a new room
heater for at least two (2) hours the rst time that it is used.
CLEANING AND MAINTENANCE
WARNING: Turn off heater and let cool before cleaning.
CAUTION: You must keep control areas and circulating air passageways of heater clean. Inspect these areas
of heater before each use. Have heater inspected yearly by a qualied service person. Heater may need more
frequent cleaning due to excessive lint from carpeting, bedding material, etc.
Verify proper operation after servicing.
Make sure the unit is working properly after the maintenance is completed.
Exterior
Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabinet to remove dust.
Air Passageways
Use a vacuum cleaner or pressurized air to clean.
Vent Cap
Use a vacuum cleaner or pressurized air to clean.
Pilot and Burner
Periodically visually check the pilot and burner ames (View ames through view port).
The correct ame pattern should be viewed by looking through the view port in front of the unit cover.
1
2
1
2
3
3
TOP
VIEW
UNDERSIDE
VIEW
1) Termocouple
2) Ignition electrode
4
4
3) Pilot
4) Gas outlet
B
A
A = minimum ames
B = maximum ames
Loading ...
Loading ...
Loading ...