Loading ...
Loading ...
Loading ...
Page 22
MAINTENANCE
1. Remove the battery pack from the saw.
2. Loosen the depth of cut adjustment lever.
Raise the saw to the maximum height and
tighten the depth of cut adjustment lever.
3. Locate and remove the hex key from the
storage area.
4. Depress the spindle lock button, place the
hex key in the blade screw and move the
hex key back and forth until you feel the
spindle lock button depress further. This
action locks the blade in position so the
blade screw can be removed. With the
spindle lock button rmly depressed, turn
the blade screw clockwise to remove it.
5. Use the blade guard lever to raise the
lower blade guard and hold it in the
raised position.
6. Remove the blade screw and the outer
blade washer and the blade.
7. The remaining washer is the inner bushing
washer that ts around the spindle shaft
and does not need to be removed.
8. Put a drop of good-quality machine
oil onto the inner bushing washer and
outer blade washer where they will
contact the blade.
9. Place a new saw blade inside the lower
blade guard, onto the spindle shaft and
against the inner bushing washer.
NOTICE: The teeth of the blade should
point upward at the front of the saw.
10. Replace outer blade washer.
11. Depress and hold the spindle lock button
as you replace the blade screw and hand
tighten the screw in a counterclockwise
direction. Use the hex key to tighten the
blade screw securely.
12. Return hex key into the storage area.
NOTICE: Never use a blade that is too thick
to allow the outer blade washer to engage
with the at side of the spindle.
Loading ...
Loading ...
Loading ...