Loading ...
Loading ...
Loading ...
Page 18
OPERATION
MAKING A BEVEL CUT (FIG. 15)
1. Secure workpiece with clamps. When
making a bevel cut, hold the saw rmly
with both hands.
2. Rest the front edge of the base on the
workpiece. Depress the lock-off button
and squeeze the trigger switch to start
the saw. Allow the saw to reach full speed
before before allowing the saw blade to
contact the workpiece.
3. After completing the cut, release the
trigger switch and allow the blade to
come to a complete stop. After the blade
has stopped, remove the saw from the
workpiece.
4. When making 45° bevel cuts, there is a
notch in the saw base to help you line up
the blade with the line of cut. Align your line
of cut with the right side of the notch by the
45° indicator.
WARNING:
Attempting to make
bevel cuts without the bevel adjustment
knob securely tightened can result in
serious injury.
FIG. 15
Line of cut
45°indicator
0° BEVEL STOP
The saw has a 0° bevel stop has been adjusted
before shipment to assure that the blade is
vertical to the base at 0°bevel cutting.
TO CHECK 0° BEVEL
STOP (FIG. 16)
Blade
Base
Carpenter’s square
FIG. 16
1. Remove battery pack from the saw.
Loading ...
Loading ...
Loading ...