Loading ...
Loading ...
Loading ...
W415-2835 / B / 04.05.21
EN
56
fi nishing
1. Place the holes in log #1 on A1 and A2.
Ensure the notch fi ts around the pilot shield.
2. Place the holes in log #2 on B1 and B2. Do not
cover any burner ports.
3. Place the holes in log #3 on C1 and C2. Do not
cover any burner ports.
5. Place the hole in log #5 on D1. Place the
opposite end on the notch in log #3.
6. Place the bottom of log #6 against the edge of
the media tray. Ensure the top branch engages
with the left end of log #3.
NOTE: Place glowing embers on the burner, in front of the large clusters of ports (not illustrated). The burner has
been designed to have large fl ames in these locations. If not, blue fl ames will be present.
1
Notch
Holes under log
(not illustrated).
A1
A2
1
Holes under log
(not illustrated).
2
B1
B2
1
Holes under log
(not illustrated).
2
3
C1 C2
1
Holes and notch
not illustrated.
2
1
3
4
Notch
No
tc
h
1
Hole under log
(not illustrated)
2
1
4
d
)
5
D1
2
4
5
3
1
6
Top Branch
4. Place the locator on log #4 into the hole in log
#2. Place the opposite end on the notch in log
#1.
7. Cover the media tray with charcoal as desired
(not illustrated). Ensure charcoal is not on
burner pan.
Loading ...
Loading ...
Loading ...