Loading ...
Loading ...
Loading ...
4
www.napoleon.com
N415-0346-AU FEB 23.21
Geng Started
1. Remove all of the parts from the carton. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging unl the appliance has been installed and operates to your sasfacon.
3. Choose a locaon that meets the clearance to combusbles as outlined in this manual. Take into consideraon
the need for clear and easy access to the on/o valve AFTER the appliance is installed and connected to the gas
supply in order to safely turn o the burner.
4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed prior to using the
appliance. The protecve coang has been removed from some of the parts during the manufacturing process
and may have le behind a residue that can be perceived as scratches or blemishes. To remove the residue,
vigorously wipe the stainless steel in the same direcon as the grain.
5. Read and follow all instrucons in this manual before installing or servicing this gas appliance.
If you have any quesons about assembly or appliance operaon, or if there are damaged or missing parts please
call our Customer Soluons Department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).
WARNING! This appliance is designed for non-combusble enclosures only, and must be installed
and serviced by a qualied installer to local codes.
CAUTION! During unpacking and assembly we recommended you wear work gloves and safety
glasses for your protecon. Although we make every eort to make the assembly process as problem
free and safe as possible, it is characterisc of fabricated steel parts that the edges and corners might be
sharp and could cause cuts if handled incorrectly.
General Informaon
This appliance shall be installed by authorised persons only and in accordance with these installaon
instrucons, AS5601.1, local gas ng regulaons, municipal building codes, electrical wiring regulaons,
local water supply regulaons and any other statutory regulaons.
The appliance and its individual shut o valve must be disconnected from the gas supply piping system
during any pressure tesng of the system at test pressures in excess of 1/2 psig (3.5kPa).
This appliance must be isolated from the gas supply piping system by closing its individual manual shut
o valve during any pressure tesng of the gas supply piping system at test pressures equal to or less
than 1/2 psig (3.5kPa).
• Always keep the appliance area clear and free from combusble materials, gasoline, and other
ammable vapours and liquids.
• Do not locate appliance where it can get excessively wet.
• Do not use this appliance if any part has been under water. Immediately call a qualied service
technician to inspect the unit and to replace any part of the control system and any gas control, which
has been underwater.
INPUT
MODEL FUEL ORIFICE SIZE MAX. INPUT MJ/Hr TEST POINT GAS PRESSURE
GSS48 Natural Gas #25 (3.8mm) 55 1.0 kPa
GSS48 Propane Gas #43 (2.26mm) 65 2.75 kPa
!
!
Loading ...
Loading ...
Loading ...