Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/81175963-gss48st/bg10.png)
16
www.napoleon.com
N415-0346-AU FEB 23.21
Natural Gas Hook-Up
The gas appliance is designed to operate with natural gas or propane gas. The piping up to the appliance
is the responsibility of the installer. A exible metal connector of 1/2 inch male is included to simplify the
installaon of the appliance. Ensure that the exible connector is protected from damage. The gas supply
pipe must be suciently sized to supply the MJ/h specied on the rang plate, based on the length of
the piping run.
The Natural Gas regulator supplied with the appliance must be connected to the gas connecon inlet.
Purge the gas supply line of any trapped air prior to the rst ring of the appliance.
WARNING!
• Risk of re, explosion or asphyxiaon, ensure there are no ignion sources such as sparks or open
ames.
• The installaon must be performed by a licensed gas er, and all connecons must be leak tested
before operang the appliance.
• The gas er must test the operaon of the appliance before leaving.
• All gas connecons must be contained within the appliance when complete.
• High pressure will damage the valve, disconnect gas supply piping before tesng gas line at test
pressures above 1/2 psig.
• Leak test all the connecons by brushing on a soap and water soluon. These connecons can be
accessed by removing the burner. (See burner removal instrucons.)
NG REGULATOR 1.00 kPa
Gas Hook-Up Instrucons
GAS CONNECTION
!
Loading ...
Loading ...
Loading ...