Loading ...
Loading ...
Loading ...
Cockpit
Menu Function
Speed warn-
ing at --- km/h
If the stored speed is exceeded (be-
tween 30 - 250 km/h, or 18 -
155 mph), an audible warning is given
together with a visual warning.
Changing between display modes
●
In vehicles without multifunction steering
wheel: press the lever.
●
Vehicle
s with a multifunction steering
wheel: press
or
.
Storing a speed for the speed warning
●
Select the display
Speed warning at --- km/h
.
●
Press
OK
to store the current speed and
switch off the warning.
●
In addition, set the required speed by
pressing the rocker switch on the windscreen
wiper lever or buttons
or
on the multi-
function steering wheel for 5 seconds. Next,
press
OK
again or wait a few seconds. The
speed is stored and the warning activated.
●
To switch off, press
OK
. The stored speed is
deleted.
Manually erasing memory 1 or 2
●
Select the memory to be erased.
●
Press and hold
OK
for approximately 2 sec-
onds.
Personalising the displays
It is possible to select which of the displays
in the multifunction display you wish to see
on the instrument panel in the settings
menu. The units of measurement can also be
modified ››› page 51
.
C
onfigur
ation Menu
Configu-
ration
Menu
Function
Multi-
function
display
data
Configuration of the multifunction display
data that you wish to see on the instrument
panel display ››› page 50.
Compass
Changing the magnetic region and calibra-
tion of the compass. To calibrate the com-
pass, please follow the instructions given
on the instrument panel display.
Conven-
ience
Changing vehicle convenience functions
››› page 52.
Lights &
visibility
Configuration of vehicle lighting
››› page 52.
Time
Changing the hours and minutes of the in-
strument panel clock and the navigation
system. The time can be set here and the
choice can be made between the 24-hour
and 12-hour display. The S in the upper
part of the display indicates that the clock
is set to summer time.
Configu-
ration
Menu
Function
Winter
tyres
Changing the visual and audible speed
warnings. This function should only be
used when the vehicle is fitted with winter
tyres, which are not designed for travel at
high speeds.
Language
Changing the language of the display texts
and the navigation system.
Units
Changing the units of measurement for the
temperature, consumption and distance.
Second
speed
Switching second speed display on and off.
Auto-Hold
Select if the Auto-Hold function should be
on permanently.
Service
Check the service notifications or reset the
service intervals to zero.
Factory
settings
Some functions of the Configuration menu
will be reset to the factory value.
Back The main menu is displayed again.
51
Technical specifications
AdviceOperationSafety
Loading ...
Loading ...
Loading ...