Loading ...
Loading ...
Loading ...
Transport and practical equipment
Note
The ventilating slits between the heated rear
window and the shelf must not be covered so
that used air can escape from the vehicle.
Folding down rear seats to create load
space
Fig. 87 Second row of seats: folding the rear
seat A, rear seat as load space B.
Fig. 88 Third row of seats: fold down the rear
seat to load A then return to position B
Each rear seat can fold down individually to
extend the luggage compartment.
Folding the seats in the second row of seats
for loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If required, remove the head restraints from
the integrated seats for children and refit
them ››› page 33
.
●
If
nec
essary, raise the armrests.
●
Remove objects from the footwell in front of
and behind the rear seat ›››
.
●
Move the rear seat all the way back.
●
Push the head restraint down as far as it
will go ››› page 6
.
●
In the mid
dl
e seat, close the drinks carrier
in the rear of the centre console, if necessary.
●
Pull lever ››› Fig. 87
1
back and fold the
seat backrest forwards. The complete rear
seat folds forward ››› .
●
Fold the seat backrest forwards until it
locks into the load surface position ››› Fig. 87
B
.
●
If
nec
essary, pull on the lever ››› Fig. 88
2
to move the seat to the required position.
●
When the seat is folded down, no adults or
children should travel in it ››› .
Folding the seats in the third row of seats for
loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
Open the rear lid.
●
Push the head restraint down as far as it
will go ››› page 6
.
»
101
Technical specifications
AdviceOperationSafety
Loading ...
Loading ...
Loading ...