Loading ...
Loading ...
Loading ...
Using the Sparkling Water Function
With a Sodastream CO
2
cylinder installed, your refrigerator can make and dispense sparkling
(carbonated) water.
Making Sparkling Water
Press and hold the Quick Sparkling button for 3 seconds to activate the Fill Up.
If the Sparkling Water function is deactivated, press and hold the Sparkling Water or Quick Sparkling
button for 3 seconds to reactivate it.
When you turn on the function, the Carbonation Level icons light up in rotation (Level-1 → Level-2 →
Level-3 → Level-1, etc.) and, within a few seconds, the refrigerator begins to make sparkling water.
When production is complete, the Carbonation Level icon rotation stops.
If you leave the Sparkling Water Production function on, and the amount of Sparkling Water becomes
low, the refrigerator automatically enters the Sparkling Water production mode and makes more.
However, if you turn o the Sparkling Water Production function, the refrigerator will not make additional
sparkling water, even if there is little sparkling water left in the Sparkling Water tank.
No OFF Icon
Press the Sparkling Water Button for 3 seconds Press the Quick Sparkling Button for 3 seconds
Sparkling Water Production Time
Depending on the Carbonation (Sparkling) Level you set (See Controlling the Carbonation Level on page
43), the amount of time it takes the refrigerator to complete the sparkling water production process
changes. The table below lists the production times by Carbonation Level.
The refrigerator is pre-set at the factory to Level 2.
Carbonation Level Level 3 - High Level 2 –Mid Level 1 -Low Quick
Production Time About 30 minutes About 20 minutes About 10 minutes Less than 10 minutes
Available Capacity 1.1ℓ 1.1ℓ 1.1ℓ 1.1ℓ
Dispensing Sparkling Water
To dispense sparkling water, press the Sparkling Water button. Then, push the Ice/Sparkling Water lever
gently with a glass. As time passes, the sparkling water dispensing speed can change.
When the water tastes strongly carbonated, the dispensing speed can be faster.
When the carbonation is weaker, the dispensing speed can slow.
The dissolved CO
2
in the sparkling water can also cause the water to pop out when you dispense it.
In addition, due to the pressure fluctuations in the Sparkling Water Tank, the water stream may shake or
become intermittent.
If you keep dispensing sparking water, the water stream may become unstable or break up.
This is caused by changes in pressure in the Sparkling Water Tank. It is not a defect.
English - 42
DA68-03022B (EN)-04.indd 42 14. 6. 23. �� 2:47
Loading ...
Loading ...
Loading ...