Loading ...
Loading ...
Loading ...
REMOVING THE
REFRIGERATOR DOORS
For some installations you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its final location.
Do not remove the doors/drawer if you don’t
need to.
If you need to remove the doors. continue below.
If you do not need to remove the refrigerator
doors, go to `Leveling the Refrigerator’ on page
23.
Disconnect power to the refrigerator
before removing the door or drawer.
Be careful not to drop, damage, or
scratch the doors/drawers while
removing them.
Use care when you remove the doors/drawers.
The doors are heavy and you could injure
yourself.
Reattach the doors/drawers properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
WARNING
Disassemble the refrigerator doors
Be careful not to drop and scratch the
doors while removing them.
With the door opened
1. Remove the 3 screws holding down the TOP
TABLE (1) and separate the connected wires.
(1)
2. Disconnect the two connectors (2) on the left
side door.
To remove the water coupler from the hinge,
twist and pull it from the hinge. Remove the
water line (3) while pressing the marked part
(4) of the water line coupler.
If a red clip is on the coupler, you must
remove it before removing the tube.
(2)
(3)
Red Clip
(1/4")
(4)
WARNING
CAUTION
English - 19
SETTING UP
DA68-03022B (EN)-04.indd 19 14. 6. 23. �� 2:47
Loading ...
Loading ...
Loading ...