Loading ...
Loading ...
Loading ...
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
(1)
(2)
(3)
(4)
(14)
(5)
(6)
(12)
(7) (8)
(10) (9)
(13)
(11)
( 1 ) Freezer (Power Freezer (3 sec))
The Freezer button serves two purposes:
- To set the Freezer to your desired
temperature.
- To turn the power freeze function on and o.
1) To set the Freezer temperature, touch the
Freezer button to set the Freezer to your
desired temperature.
You can set the temperature between -15°C
and -23°C.
2) Power Freeze function
Touch and hold this button for 3 seconds to
decrease the time needed to freeze products in
the Freezer.
It can be helpful if you need to quickly freeze
easily spoiled items or if the temperature in the
freezer has warmed dramatically (For example, if
the door was left open).
When you use this function the energy
consumption of the refrigerator will increase.
Remember to turn it o when you don’t
need it and return the freezer to your original
temperature setting.
If you need to freeze large amount of food stu,
activate Power Freeze function at least 20 hours
before.
( 2 ) Alarm (Filter Reset (3 sec))
The Alarm button serves two purposes:
- To turn the door open alarm on and o
- To reset the water filter life indicator.
1) Door Alarm Function
If the door alarm is set to On, an alarm beeps if
any refrigerator door is left open for more than
three minutes.
The beeping stops when you close the door.
The door alarm function is pre-set to On in the
factory.
You can turn it o by pressing and then
releasing the Alarm button.
You can turn it back on in the same fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and the
alarm sound is triggered, the Door Alarm Icon
will blink while the alarm sounds.
2) Water Filter Life Indicator Function
After you replace the water filter, touch and hold
this button for 3 seconds to reset the water filter
life indicator.
When you reset the water filter life indicator, the
Filter icon on the panel turns O.
The Filter icon will turn red to let you know it is
time to change the water filter after six months
(about 300 gallons).
Some areas have large amounts of lime in their
water, which causes the water filter to clog
more quickly.
If this is the case in your area, you will have to
change the filter more frequently than every six
months.
English - 30
DA68-03022B (EN)-04.indd 30 14. 6. 23. �� 2:47
Loading ...
Loading ...
Loading ...