Loading ...
Loading ...
Loading ...
309Wheels and tyres
Full hubcaps*
Fig. 182 Removing the
full hubcap
Removing the full hubcap
● Take the wheel brace and the wire hook from the vehicle tool kit
⇒
page 324.
● Hook the wire through one of the grooves on the hubcap.
● Insert the wheel brace onto the wire hook
⇒
Fig. 182 and pull the hub
cap in the direction shown by the arrow.
Fitting hubcaps
Before mounting the full hubcap, the anti-theft wheel lock must be threaded
into position
⇒
Fig. 185
2
or
3
. Otherwise it will not be possible to mount
the full hubcap.
Press the hubcap against the wheel so that the space for the valve fits over
the tyre valve
⇒
Fig. 185
1
. Make sure that the hubcap is correctly fitted all
the way around the wheel.
Wheel bolt caps
Fig. 183 Removing the
wheel bolt caps
● Take the wire hook from the vehicle tool kit
⇒
page 324.
● Insert the wire hook in the cap through the opening
⇒
Fig. 183 and pull
outwards in the direction of the arrow.
The caps protect the wheel bolts and should be remounted after changing
the tyre.
The anti-theft wheel locking bolt has a special cap. This cap only fits on an-
ti-theft locking bolts and is not for use with standard wheel bolts.
Safety First Operating instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...