Loading ...
Loading ...
Loading ...
186 Driving
Warning and control lamps
lights up
Possible cause ⇒
Solution
(red)
Together with the control
lamp on the button: Elec-
tronic parking brake on.
⇒ page 187
Fault in the brake system
Stop the vehicle!
Seek professional assistance!
⇒ page 189.
Brake fluid level inadequate.
Do not drive on!
Check brake fluid level
⇒ page 194.
Together with the ABS con-
trol lamp : ABS fault.
Contact a specialised workshop.
The vehicle can be braked with-
out ABS.
(red)
Brake pedal not pressed! Press brake pedal to the floor.
(yellow)
Front brake pads worn.
Contact a specialised workshop
immediately. Inspect all the
brake pads and replace as nec-
essary.
(yellow)
ESC disconnected by the sys-
tem.
Switching the ignition on and
off If necessary, drive for a short
distance.
Fault in the ESC. Contact a specialised workshop.
Together with the ABS con-
trol lamp : Fault in ABS.
Contact a specialised workshop.
The vehicle can be braked with-
out ABS.
The battery has been recon-
nected.
⇒ page 292
lights up
Possible cause ⇒
Solution
(yellow)
ASR manually deactivated.
Switch on ASR ⇒ page 193.
ASR is automatically activated
when the ignition is switched on
or off.
(yellow)
Together with the ESC control
lamp : Fault in ABS.
Contact a specialised workshop.
The vehicle can be braked with-
out ABS.
Together with the warning
lamp or : ABS fault.
(yellow)
Together with the warning
lamp flashing: Electronic
parking brake faulty.
Contact a specialised workshop.
(green)
Brake pedal not pressed.
Press the brake pedal to select
a gear range.
Press the brake pedal to discon-
nect the electronic parking
brake ⇒ page 187.
flashes
Possible cause ⇒
Solution
(red)
Electronic parking brake faul-
ty. The control lamp may
light up at the same time or
the control lamp may flash
on the button.
Contact a specialised work-
shop, as it may not be possible
to park the vehicle in safety.
(yellow)
ESC or ASR regulating.
Take your foot off the accelera-
tor. Adjust your driving style to
the road conditions.
Several warning and control lamps should light up for a few seconds when
the ignition is switched on, signalling that the function is being verified.
They will switch off after a few seconds.
Loading ...
Loading ...
Loading ...