Loading ...
Loading ...
Loading ...
202 Driving
Optical parking system* (OPS)
Fig. 144 On-screen OPS
display:
A
an obstacle
has been detected in the
collision zone.
B
an ob-
stacle has been detected
in the segment
C
zone
recorded behind the vehi-
cle
Fig. 145 On-screen OPS
display:
A
an obstacle
has been detected in the
segment
B
zone recor-
ded behind the vehicle
The optical parking system is an accessory to the Parking sensor system
⇒ page 201 and the park assist system ⇒ page 204.
The zone recorded by the sensors in front of and behind the vehicle is dis-
played on the factory-fitted radio or navigation system screen. Any obsta-
cles are display in relation to the vehicle ⇒
.
effect Necessary operations
Switching the display
on:
Switch on the parking sensor system ⇒ page 201
or the park assist system ⇒ page 204. The OPS
switches on automatically.
Switching the display
off manually:
Press a zone selection button on the factory-fit-
ted radio or navigation system
OR: Briefly press the function button
or
RVC
on the screen.
Switching the display
off manually:
Drive forwards at more than about 10-15 km/h (6
to 9 mph).
Select the reverse gear on vehicles with rear as-
sist ⇒ page 209. The display changes to the im-
age of the camera.
Zones explored
The zone in which obstacles are recognised runs to a distance of around
120 cm from the front of the vehicle and up to 60 cm to the side ⇒ Fig. 145
B
. Behind the vehicle, the zone analysed reaches a distance of up to
160 cm and around 60 cm to the sides ⇒ Fig. 144
C
.
Screen display
The image displayed represents the supervised zones in several segments.
As the vehicle moves closer to an obstacle, the segment moves closer to the
vehicle displayed ⇒ Fig. 144
B
and ⇒ Fig. 145
A
. When the penultimate
segment is displayed, this means that the vehicle has reached the collision
zone. Stop the vehicle!
Loading ...
Loading ...
Loading ...