Loading ...
Loading ...
Loading ...
36
Function Description
HDR
HDR
The projector supports HDR imaging sources. It can
automatically detect the dynamic range of the source from
HDMI 1, and optimize settings to reproduce contents under
wide range of light conditions. If the input source is not
defined with dynamic range, you can also manually select
Auto or SDR for it. Adjusting the setting will have no impact
if the projector receives a non-HDR content.
EOTF
The projector can automatically adjust the brightness levels of
your image according to the input source. You can also
manually select a brightness level to display better picture
quality. When the value is higher, the image becomes brighter;
when the value is lower, the image becomes darker. This
function is not available when SDR is selected in the HDR
menu.
Audio Settings See "Adjusting the sound" on page 27 for details.
HDMI Range See "Changing HDMI input settings" on page 20 for details.
Password See "Utilizing the password function" on page 18 for details.
Panel Key Lock See "Locking control keys" on page 26 for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Picture Mode,
Brightness, Contrast, Color, Tint, Sharpness, Advanced,
Aspect Ratio, Silence, Projector Mode, Light Source
Mode, Rename Input, EOTF, Password.
Noise
Reduction
See "Reducing image noise" on page 25 for details.
Brilliant Color See "Adjusting Brilliant Color" on page 25 for details.
Input
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format.
Light Source Usage Time
Shows the number of hours the light source has been used.
Firmware Version
Shows the current firmware version.
SYSTEM SETUP: ADVANCED menu
Information menu
Loading ...
Loading ...
Loading ...