Loading ...
Loading ...
Loading ...
34
Function Description
Projector Mode See "Choosing a location" on page 11 for details.
Test Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Light Source
Settings
Light Source Mode
See "Setting Lamp Mode" on page 38 for details.
Reset Light Timer
Resets the lamp timer after new lamp is installed. For changing
the lamp, please contact qualified service personnel.
Light Source Information
See "Getting to know the lamp hour" on page 37 for details on
how the total lamp hour is calculated.
12V Trigger
There is one 12V trigger that works according to your needs
for installation scenarios. Two selections are available:
Off
If this is selected, the projector will not send electronic signal
out when it is turned on.
On
The projector will send a low to high electronic signal out
when it is turned on, a high to low signal out when it is turned
off.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in
a high altitude environment" on page 26 for details.
INSTALLATION menu
Loading ...
Loading ...
Loading ...