Loading ...
Loading ...
Loading ...
Preparing the Main Power Supply
26
Preparing the Main Power Supply
You can power the camera using a commercially available V-mount battery or the DC IN 12V terminal. Even
when a battery is attached, if a power source is connected to the DC IN 12V terminal, the camera will not draw
power from the battery.
Acceptable Power Sources
When selecting commercially available batteries and power adapters, make sure the external power source
meets the following specifications and all the safety standards of the country/region where it is used. Closely
follow the manufacturer’s instructions regarding the use and maintenance of power sources.
Using a Battery
The battery adapter for V-mount batteries comes attached to the camera. If it was removed, attach the battery
adapter in advance (A 24).
Attaching a Battery
1 Make sure the camera is turned off.
2 Align the V-shaped wedge on the battery to the V-mount on the
battery plate.
3 Gently press the battery down until it clicks in place.
Removing a Battery
1 Press the
Q
button to turn off the camera.
2 While holding the battery release latch pressed down, slide the
battery up and remove it.
Power source Specifications
Battery V-mount battery, 14.8 V DC (acceptable range: 12 V to 20 V DC)
Power adapter
(DC IN 12V terminal)
4-pin XLR plug (female connector), 12 V DC (acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum
load current)
햳
햴
햳
Loading ...
Loading ...
Loading ...