Loading ...
Loading ...
Loading ...
41
REMOVING AND INSERTING THE OVEN DOOR
B
A
When replacing the door, always make sure the hinge retainers
are correctly placed in the hinge beds to prevent sudden
closing of the main hinge which is connected to a strong main
spring. If the main spring is engaged, there is a risk of injury.
1
First, fully open the door (as far as it will go).
2
Slightly lift the hinge retainers and pull the door
towards you.
3
Slowly close the door to a 45-degree angle (relative
to the position of the fully closed door); then, lift the
door and pull it out.
To replace the door, observe the reverse order. If
the door does not open or close properly, make sure the
notches on the hinges are aligned with the hinge beds.
SOFT DOOR CLOSING (depending on the model)
Oven door is fi tted with a system that dampens the door opening force, starting at the 75-degree angle.
SOFT DOOR CLOSING (depending on the model)
Oven door is fi tted with a system that dampens the door closing force, starting at the 75-degree angle. It allows simple, quiet, and
smooth closing of the door. A gentle push (to a 15-degree angle relative to the closed door position) is enough for the door to close
automatically and softly.
If the force applied to close the door is too strong, the eff ect
of the system is reduced or the system will be bypassed for
safety.
DOOR LOCK (depending on the model)
Open the door lock by gently pushing it to the right with your thumb while simultaneously pulling the door outwards.
When the oven door is closed, the door lock automatically
returns to the initial position.
Loading ...
Loading ...
Loading ...