Loading ...
Loading ...
Loading ...
5
Connecting the Dishwasher
Your dishwasher comes equipped with a Faucet Adapter, Quick Connect, Drain Hose, and Inlet
Hose. The Faucet Adapter must be installed on the faucet before you can connect the
dishwasher. This adapter comes packaged inside your dishwasher.
The Faucet Adapter is compatible with faucets inclusive of either male (outside) or female (inside)
threaded faucet connections.
1. Screw the Faucet Adapter onto (or into) the faucet tap. Check for leaks (use Teflon or
plumbers tape to eliminate any leaks if necessary).
2. Connect the six-sided connection of the drain hose to the drain port connection on the back of
the dishwasher cabinet. To avoid damage to threads, do not over-tighten.
3. Connect the star-shaped connection of the inlet hose to the inlet port on the back of the
dishwasher cabinet. Do not over-tighten.
4. Connect the circular connection of the drain hose onto the longer (bottom) male connection on
the Quick Connect.
5. Connect the circular connection of the inlet hose onto the shorter (top) male connection on the
Quick Connect.
6. Attach the Quick Connect assembly onto the Faucet Adapter, by pulling down the outer locking
collar on the Quick Connect, while pushing the quick connect assembly upward onto the
Faucet Adapter.
7. Release the locking collar when the quick-connect assembly snaps onto the Faucet Adapter.
Verify the connection is secure.
8. Slowly open the hot water line and check for any sign of water leaks at all connections. If leaks
are located, immediately close the water supply and repair the hose connections.
Loading ...
Loading ...
Loading ...