Loading ...
Loading ...
Loading ...
13
Rinse Aid Dispenser
The rinse aid is released during the final rinse to remove spots, prevent new film build-up on
your dishes, glasses, flatware, cookware and plastic, and improve drying time. Your
dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the
door next to the detergent dispenser.
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal conditions, this will last
approximately one month. Try to keep it full, but do not overfill.
1. Make sure the dishwasher door is fully open.
2. Turn the dispenser cap counterclockwise and lift it out.
3. Add rinse agent until the indicator window looks full.
4. Clean up any spilled rinse agent with a damp cloth.
5. Replace the dispenser cap and turn clockwise to lock into place.
Refilling the Dispenser
If the rinse aid dispenser needs to be refilled, the rinse aid warning light on the control panel
(located on the front of your dishwasher) will turn on. Alternatively, you can see the amount
of rinse aid remaining via the indicator on the dispenser. If the dispenser is full, the indicator
will be dark and full. The dispenser should be refilled before falling below ¼ full to ensure
that rinse aid continues to be effective and to prevent streaking and spotting.
Rinse Aid Setting
The amount of rinse agent released into the final wash can be adjusted. The factory setting
is at the midpoint. If there are rings of calcium (hard water) on dishes, try a higher setting.
To Adjust the Setting
Remove the dispenser cap. Then, turn the adjuster counterclockwise to increase the amount
of rinse agent.
Note:
• Only use branded rinse aid for the dishwasher.
• Never fill the rinse aid dispenser with any other substances, such as liquid detergent.
Loading ...
Loading ...
Loading ...