Loading ...
Loading ...
Loading ...
7
Disconnecting your Dishwasher
1. Close the hot water supply at the faucet.
2. Disconnect the power supply cord.
3. Remember to release the water pressure inside the inlet hose.
4. The inlet hose is pressured when the water supply line is opened, even if closed immediately.
5. To release pressure: press and hold the red pressure relief button on the Quick Connect
assembly until the flow of water stops.
6. Disconnect the quick-connect hose assembly by pulling down on the outer locking collar, thus
releasing it from the Faucet Adapter.
Operating Instructions
To get the best performance from your dishwasher, read all operating instructions and follow the checklist
below
The following things should be checked before using the dishwasher.
1. The dishwasher is level.
2. The inlet valve is open.
3. The hot water faucet is open.
4. There are no leaks at the drain and inlet ports.
5. The unit’s power plug is connected to a grounded outlet.
6. The power is switched on.
7. There are no kinks in the drain and inlet hoses.
8. All packing and printed materials are removed from the dishwasher.
Caution:
• Failure to relieve water pressure before disconnection the Quick Connect assembly from
the Faucet Adapter may result in backpressure overspray.
• The inlet water temperature can be EXTREMELY HOT.
• Backpressure overspray could cause SEVERE burns and or scalding.
• Do NOT let children disconnect the dishwasher. Close supervision of children is always
important around appliances.
Loading ...
Loading ...
Loading ...