Loading ...
Loading ...
Loading ...
14
Starting a Wash Cycle
Once the dishwasher is fully loaded follow these procedures to start the wash cycle:
• Ensure that the unit is connected to the power supply.
• Ensure that the water supply is turned on to full pressure.
• Pour in the detergent.
• Verify that enough rinse aid is in the dispenser, if desired.
• Close the door and press the ON/OFF button to power the dishwasher on.
• Press the program button to select the desired wash cycle:
Heavy -> Normal -> Light -> Glass -> Baby Care -> Speed -> Rinse
• Press the +/- buttons to adjust the delay setting if desired.
• Press the START/PAUSE button, the dishwasher begins to start. If a delay time was selected,
the dishwasher will start after the delay.
Changing a Wash Cycle
You can modify the washing cycle, but only when the dishwasher has been running for a short time.
Otherwise, detergent may have been released, and the appliance may have already drained the
water. If this is the case, the detergent dispenser must be refilled.
Pressing the START/PAUSE button for three seconds or more will put the machine in a stand-by
state. At this point the cycle setting can be changed.
Note:
• When the Start/Pause button is pressed during a wash cycle the cycle is suspended and
the display time will stop blinking. The program will remain paused until the Start/Pause
button is pressed again to continue the cycle.
Caution:
• Opening the door during the wash cycle may result in injury from scalding hot water.
• Ensure that wash cycle has fully stopped before opening the door to refill the detergent
dispenser if necessary.
Note:
• If the door is opened during the wash cycle, the machine will be paused. Once the door is
closed, you need to press the Start/Pause button to continue the cycle.
Loading ...
Loading ...
Loading ...