Loading ...
Loading ...
Loading ...
21
Troubleshooting
Follow the troubleshooting guide below to resolve common issues:
Issue
Possible Cause
Solution
Dishwasher does not
start
Fuse is blown or
circuit breaker is
tripped
Replace fuse or reset circuit breaker. Remove any
other appliances sharing the same circuit with the
dishwasher.
Power Supply is
not turned on
Ensure the dishwasher is turned on and the door is
closed securely.
Make sure the power cord is properly plugged into
the wall socket.
Dishwasher door is
not properly closed
Close dishwasher, ensuring that the door latches.
Water not pumped from
dishwater
Kink in drain hose
Check drain hose.
Filter clogged
Check coarse filter.
Kitchen sink
clogged
Ensure kitchen sink is draining well. If sink is not
draining, refer to a plumber.
Suds in tub
Improper detergent
Use only the specified detergent. If improper
detergent was used, open the dishwasher allowing
suds to evaporate. Add 1 gallon of cold water to
the tub. Close and latch the door. Start the
“RINSE” wash cycle to drain the water. Repeat if
necessary.
Spilled rinse aid
Always clean up rinse aid spills immediately.
Stained tub interior
Detergent used
contained colorant
Do not use detergents with colorants.
White film on dishwasher
interior surface
Hard water
minerals
While wearing rubber gloves, use a damp sponge
to clean the interior with dishwasher detergent.
Never use any other cleaner to clean dishwasher.
Rust stains appear on
cutlery
Items are not non-
corrosive
Do not place non-dishwasher safe items in
dishwasher.
Knocking noise inside of
dishwasher
The spray arm is
knocking against
an item in the dish
rack
Pause the wash cycle and rearrange the items
which are obstructing the movement of the spray
arm.
Rattling noise inside of
dishwasher
Item is not securely
placed in dish rack
Pause the wash cycle and secure the items in the
dish rack.
Knocking noise in water
pipes
Pipe cross-section
may problems
Contact a plumber. This is not related to the
dishwasher.
Loading ...
Loading ...
Loading ...