Loading ...
Loading ...
Loading ...
310
%
*
[MC31700(ALL)03/96
]
How to Prepare Your Vehicle for
Inspection/Maintenance (I/M) Testing
*
[MC31800(ALL)07/96]
In some localities it may become a legal requirement to pass an
Inspection/Maintenance (I/M) test of the On-Board Diagnostic
(OBD) II system. If the vehicle’s powertrain system or its battery
has just been serviced, the OBD II system is reset to a not ready
for I/M testing condition. To prepare for I/M testing, the law
specifies that additional mixed city and highway driving is
required to complete the check of the OBD II system.
*
[MC31825(ALL)07/96]
The driving modes required to reach the ready condition consist
of a minimum of 30 minutes of city and highway driving as
described below:
*
[MC32000(ALL)07/96]
■ At least twenty minutes driving in stop and go, city type
traffic with at least four idle periods.
*
[MC32100(ALL)07/96]
■ At least ten minutes of driving on an expressway or
highway.
*
[MC32200(ALL)07/96]
Before completing the above driving modes, the engine must be
warmed up and at operating temperature. Once started, the
vehicle must not be turned off during these driving modes.
[MC33200(ALL)01/96]
Lights
*
[MC33300(ALL)01/96]
It is a good idea to check the operation of the following lights
frequently:
*
[MC33400(ALL)01/96]
■ headlamps
*
[MC33500(ALL)01/96]
■ tail lamps
*
[MC33600(ALL)01/96]
■ brakelamps
*
[MC33700(ALL)01/96]
■ hazard flasher
*
[MC33800(ALL)01/96]
■ turn signals
*
[MC33900(ALL)05/96]
■ license plate lamps
*
[MC34000(ALL)01/96]
■ fog lamps
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Loading ...
Loading ...
Loading ...