Loading ...
Loading ...
Loading ...
288
*
[MC13000(ALL)01/96]
Use only power steering fluid that meets Ford Specification
ESW-M2C33-F, such as Ford Premium Power Steering Fluid,
E6AZ-19582-AA or an equivalent Type F Automatic Transaxle
Fluid with a Ford registration number (an 8-digit number
beginning with ”2P“ printed on the fluid container).
*
[MC13100(ALL)01/96]
NOTE: If the power steering fluid is low, do not drive your
vehicle for a long period of time before adding fluid.
This can damage the power steering pump.
*
[MC13200(ALL)01/96]
If you must check the power steering fluid when it is cold,
make sure that the fluid reaches at least the minimum (MIN)
mark. The reading will only be accurate if the fluid temperature
is approximately 70˚ to 100˚F (21˚ to 38˚C).
%
*
[MC13300(ALL)01/96] Automatic Transaxle Fluid
[MC13400(ALL)01/96]
Under normal circumstances, you need to change the fluid at
30,000 miles (48,000 km) for normal operating conditions or
21,000 miles (34,000 km) for severe duty. However, if the
transaxle is not working properly (for example, slipping or
shifting slowly), or you notice some sign of fluid leakage, the
fluid level should be checked.
[MC13500(ALL)09/96]
It is best to check the transaxle fluid level at normal operating
temperature, after approximately 20 miles (32 km) of driving.
However, if necessary, you can check the fluid level without
having to drive 20 miles (32 km) to obtain a normal operating
temperature if outside temperatures are above 50˚F (10˚C).
*
[MC13600(ALL)01/96]
NOTE: If the vehicle has been operated for an extended
period at high speeds or in city traffic during hot
weather, or if it has been pulling a trailer, the engine
should be turned off for about 30 minutes to allow
the fluid to cool before checking.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Loading ...
Loading ...
Loading ...