Loading ...
Loading ...
Loading ...
Operation
(yellow)
It lights up
The automatic
gearbox over-
heats temporari-
ly.
Let the transmission cool with the
gearbox lever in the position
.
When the control lamp does not
light up, find the nearest special-
ised workshop and have the auto-
matic gearbox checked.
It lights up
Place the automatic
gearbox lever in the
position
and do not
press the brake pedal.
Press the brake pedal to select
a gear range.
Together with the yel-
low control lamp for
the temperature of the
transmission
: the
automatic gearbox
overheats.
Press brake pedal and let the
transmission cool. Avoid
pressing the accelerator. When
the control lamp does not light
up, find the nearest special-
ised workshop and have the
automatic gearbox checked.
Together with the turn
signal display in the
instrument panel dis-
play: the automatic
gearbox lever is not in
the position
, indica-
tion to start the en-
gine.
Move the gearbox lever to the
position
and start the en-
gine.
Flashes
An automatic gearbox
in the vehicle does
not guarantee that the
vehicle will not roll
away.
Apply the handbrake.
Flashes
In the instrument pan-
el display, in addition
to the control lamp re-
questing the brake
pedal to be pressed
: indicated for start-
ing the engine.
Move the gearbox lever to the
position
and start the en-
gine.
On the instrument
panel display: Whilst
driving in a forward di-
rection, try to move
the automatic gearbox
lever to the position
.
Stop the vehicle and move the
gearbox lever to the position
in order to subsequently
change to the position
.
On the instrument
panel display: The au-
tomatic gearbox lever
was placed in the po-
sition
or
, but the
brake pedal was not
pressed.
Press the brake pedal, move
the gearbox lever to the posi-
tion
, and subsequently to
the required position
or
.
When switching on the ignition some warn-
ing and control lamps light up for a short
time to check the operations. They will switch
off after a few seconds.
Manual gearbox: engaging gears
Fig. 81 Gear shift pattern of a 5-speed man-
ual gearbox
The position of each of the gears is shown on
the gear stick ››› Fig. 81
.
●
K
eep the c
lutch pedal pushed all the way
down.
●
Move the gearbox lever to the required po-
sition ›››
.
●
Release the clutch pedal to engage clutch.
In some countries, it is necessary to press the
clutch pedal to the floor to start the engine.
Selecting reverse gear
●
Engage reverse gear only when the vehicle
is stopped.
●
Keep the clutch pedal pushed all the way
down ››› .
94
Loading ...
Loading ...
Loading ...