User Manual - Page 66

For MII 2014.

Loading ...
Loading ...
Loading ...
Operation
Removing and installing the rear head
restraints
Fig. 54 Removing the rear head restraint
The rear seats are equipped with a head re-
straint.
Removing the rear head restraint.
Unlock the seat backrest and fold it forward
page 73
.
P
u
sh the head restraint up as far as it will
go
.
Pull the head restraint out of the fitting
without releasing the button Fig. 54
1
.
Fold the backrest of the rear seat backward
again until it is engaged.
Safely store the removed head restraints.
Removing the rear head restraint.
Unlock the seat backrest and fold it forward
page 73
.
In
ser
t the head restraint into the guides on
the seat backrest.
Push the head restraint down as far as it
will go while pressing button
1
.
Fold the backrest of the rear seat backward
again until it is engaged.
Adjust the head restraint to the correct po-
sition page 9
.
WARNING
Travelling with the head restraints removed
or improperly adjusted increases the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres.
Always fit and adjust the head restraint
properly whenever a person is occupying a
seat.
Refit any removed head restraints immedi-
ately so that passengers are properly protec-
ted.
CAUTION
When removing and fitting the head restraint,
make sure it does not hit the headliner of the
vehicle or the front seat backrest. Otherwise,
the interior roof and other parts of the vehicle
could be damaged.
Seat functions
Seat heating*
Fig. 55 In the centre console: Front seats
heating switch
The front seat cushions can be heated electri-
cally when the ignition is switched on.
Switch off seat heating if there is nobody in
the seat.
Function Action Fig. 55
Activate Press button
. Seat heating is
switched on fully. All warning sig-
nals light up.
Adjusting the
heating output
Press the button
again to adjust
the desired heat.
Deactivating Keep pressing button
until all of
the lights are switched off.
64
Loading ...
Loading ...
Loading ...