Loading ...
Loading ...
Loading ...
Cockpit
Control functions of the instrument
panel display
Fig. 26 Windscreen wiper lever: control but-
tons.
Calling up options
●
Switch the ignition on.
●
If a message or vehicle symbol is dis-
played, press
OK/RESET
(››› Fig. 26
A
).
●
Press the top or bottom part of the rocker
switch ››› Fig. 26
B
until the desired option
appears.
Multifunction display (MFI)
The multifunction display (MFI) has two auto-
matic memories: 1 - Partial memory and 2 -
Total memory. The selected memory will be
shown in the lower right-hand corner of the
display.
With the ignition switched on, and memory 1 or
2 displayed, briefly press
OK
to change from
one memory to another.
1
Trip memo-
ry (for a
single jour-
ney).
The memory stores the values for the
journey and the consumption from
the moment the ignition is switched
on until it is switched off again.
If the journey is broken for more than
2 hours, the memory is automatically
erased. If the journey is continued in
less than 2 hours after the ignition is
switched off, the new data is added to
the data already stored in the memo-
ry.
2
Total mem-
ory (for all
journeys).
The memory stores the values of any
number of journeys, until it counts a
total of 19 hours and 59 minutes of
driving, or 1999.9 km or miles of driv-
ing, depending on the type of instru-
ment panel fitted. On reaching either
of these limits, the memory is auto-
matically erased and starts to count
from 0 again.
Possible displays
Menu Function
Time Current time in hours (h) and minutes
(min).
Journey dura-
tion
This indicates the hours (h) and mi-
nutes (min) since the ignition was
switched on.
Menu Function
Current fuel
consumption
The current fuel consumption display
operates throughout the journey, in
l/100 km; with the engine running
and the vehicle stopped, in l/hour.
Average fuel
consumption
After turning on the ignition, average
fuel consumption in litres/100 km will
be displayed after travelling about
100 metres. Otherwise horizontal
lines are displayed. The value shown
is updated approximately every 5 sec-
onds.
Operating
range
Approximate distance in km that can
still be travelled with the fuel remain-
ing in the tank, assuming the same
style of driving is maintained. This is
calculated using the current fuel con-
sumption.
Distance cov-
ered
Distance travelled, after ignition is
switched on, in km.
Average speed The average speed will be shown after
a distance of about 100 metres has
been travelled. Otherwise horizontal
lines are displayed. The value shown
is updated approximately every 5 sec-
onds.
Digital display
of speed
Current speed displayed digitally.
Liquid coolant
temperature
digital display
Digital display of the current tempera-
ture of the engine liquid coolant.
»
41
Technical specifications
AdviceOperationSafety
Loading ...
Loading ...
Loading ...