Loading ...
Loading ...
Loading ...
Operation
Opening and closing the
sliding/tilting electric panoramic
sunroof
Fig. 41 In the interior roof: turn the knob to
open and close
Fig. 42 In the interior roof: turn the knob to
raise and to close the sunroof
To raise the sliding/tilting sunroof, the knob
must be in the basic position
1
.
Function ››› Fig. 41
or
››› Fig. 42
Action
Fully open-
ing the slid-
ing sunroof:
3
turn the know beyond
position 2 and hold it in
that position until the
sunroof reaches the re-
quired position.
Put the slid-
ing sunroof
in conven-
ience posi-
tion:
2
Turn the knob to the re-
quired position.
To set the in-
termediate
position:
2
to
1
Fully closing
the sliding
sunroof:
1
To raise the
tilting sun-
roof com-
pletely:
4
briefly press the rear part
of the knob.
To stop auto-
matic opera-
tion:
4
or
5
Press or pull the knob
again briefly.
To close
completely:
5
briefly pull the rear part
of the knob.
The sliding/tilting sunroof only works when
switched on. After switching off, it is still pos-
sible to open or close the sliding/tilting sun-
roof during a short space of time provided
that neither the driver nor passenger door is
opened.
All operations are interrupted when the rotary
knob is actuated.
If it were not possible to close the sliding/tilt-
ing sunroof electrically, it would need to be
closed manually. It is not possible to do an
emergency close of the sliding/tilting sun-
roof without removing components of the ve-
hicle. In such a case, obtain professional as-
sistance.
Sliding blind
With the roof grab handle situated in the rear
part of the roof opening, it is possible to
move the sliding blind to the required posi-
tion.
Note
The convenience position permits sufficient
ventilation with a level of sound produced by
low wind.
Anti-trap function of the
sliding/tilting electric panoramic
sunroof
The anti-trap function can reduce the risk of
injury when closing the sliding/tilting electric
panoramic sunroof
›››
. If the sliding/tilting
54
Loading ...
Loading ...
Loading ...