Loading ...
Loading ...
Loading ...
33
g) Place descale solution into water tank,
fill with cold water to MAX line, (if an
alternative cleaning solution is used, please
follow the manufacturer's instructions
accordingly). Lock water tank back into
position at the back of the machine.
NOTE
If water tank has not been removed,
replaced or is empty, “FILL TANK” will
appear on the LCD.
NOTE
Emptying boilers typically takes
5-10 minutes. If the machine was turned
off at this stage, follow '1 - Prepare for
Descale' again.
3 – Begin Descale
a) Press 1 Cup button and the LCD screen will
show countdown time (20 minutes).
During this time, the machine will fill boilers
with descale solution and heat to temperature.
There may be some water flow through
the group head during this time. Allow the
countdown timer to reach 0 as this allows
solution sufficient time to dissolve scale build
up. However you can proceed to the next step
at any time by pressing the 1 Cup button.
b) Place a cloth over the drip tray to stop
steam escaping.
c) Empty boilers by repeating steps 2c and 2d.
d) Empty drip tray and insert back to place.
CARE & CLEANING
e) Empty water tank then rinse and fill with
clean water to the MAX line. Lock water
tank back into position.
4 – Flush Boilers
a) Press 1 Cup button and the LCD screen will
show countdown time (20 minutes).
During this time, the machine will fill boilers
with fresh clean water and heat to temperature.
You can proceed to the next step at any time by
pressing the 1 Cup button.
b) Place a cloth over the drip tray to stop
steam escaping.
c) Empty boilers by repeating steps 2c and 2d.
d) Empty drip tray and insert back into place.
e) Empty water tank then rinse and fill with
clean water to the MAX line. Lock water
tank back into position.
5 – Repeat Step 4 Flush Boilers
We recommend flushing boilers again to
ensure any residual descale solution is released
from the boilers.
Press POWER button to escape the Descale
mode. The descale process is now complete
and ready to use.
Loading ...
Loading ...
Loading ...