Loading ...
Loading ...
Loading ...
30
CLEANING THE STEAM WAND
IMPORTANT
After every use, thoroughly wipe the
steam wand and tip with a damp cloth
& purge immediately. Failure to clean
the steam wand may affect the milk
texturing performance.
• If any of the holes in the tip of the steam
wand become blocked, ensure the steam
lever is in the centre OFF position and
unblock using the steam tip cleaning tool.
Even partially blocked holes may affect
the ability of the steam wand to produce
sufficient foam volume.
• If steam wand remains blocked, remove
the tip and soak together with steam
wand using the provided steam wand
cleaning powder (instructions below).
Screw tip back onto the steam wand
after rinsing.
CARE & CLEANING
• The steam wand can be left immersed in
the milk jug filled with water when not
in use to reduce the risk of blockages.
Steam Wand Cleaning Powder
1. Add 1 packet into an empty milk jug.
2. Add 1 cup (240ml) hot water into
milk jug.
3. Remove steam tip and place with
steam wand into jug.
4. Leave to soak for 20 minutes.
5. Clean, rinse and replace steam tip.
Place wand back into the jug and
activate steam for 10 seconds.
6. Allow to soak for 5 minutes.
7. Activate steam several times to purge
the steam wand, then rinse the
wand thoroughly.
8. Wipe the steam wand dry with a clean
cloth.
9. Discard solution & rinse jug
thoroughly.
NOTE
If an alternative cleaning solution is used,
please follow the instructions specified.
Please ensure the cleaning solution is food
safe and suitable for stainless steel and
silicon products.
Please ensure the steam wand tip is tightly
fastened after cleaning to avoid temp
sensing error.
Steam Wand
Tip
Loading ...
Loading ...
Loading ...