Loading ...
Loading ...
Loading ...
23
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
Flow Measurement Method (VoL)
Select between volume based (FLo) or
time based (SEc) method for espresso
dose measurement. Rotate SELECT dial
to the desired method. Press SELECT
dial to set. Machine will beep once to
confirm selection.
ALERTS
MANUAL will flash on steam LCD
The machine will not reach operating
temperature (STANDBY mode) if the steam
lever is in the MANUAL position. The steam
LCD will display 'MANUAL'. Lower the steam
lever to the centre OFF position.
Steam operation is ready when the SELECT
dial illuminates.
Fill Tank
The machine will detect a low water level.
The LCD will display 'FILL TANK'.
Fill tank with cold fresh water. The machine
will not be able to make coffee or hot water
while the tank is empty.
Clean Me!
Indicates when 200 extractions have been
carried out since the last cleaning cycle.
The cleaning cycle cleans the shower
screen and back-flushes the group head. For
information on how to clean the machine, refer
to 'Cleaning Cycle', page 28.
Heating
Indicates when the machine is heating up
or if the temperature drops excessively
during use.
Lock Hopper
Indicates if the bean hopper has not been
properly inserted and locked into position.
The auto grind, dose & tamp function cannot
be used during this time and 3 beeps will
sound if user attempts to activate.
Overheat Please Wait
Indicates if the grinder is used excessively
and needs time to cool. The auto grind, dose &
tamp function cannot be used during this time
and 3 beeps will sound if user attempts
to activate.
Change Filter
Indicates when the water filter in the water
tank needs to be replaced. For information
on changing the filter, refer to 'Installing The
Water Filter', page 10.
The regularity of this alert is determined
by the water hardness setting (Hrd1-Hrd5)
selected. For information, refer to 'Setting
Water Hardness', page 11 and 'Water Hardness
(Hrd3)', page 22.
TRANSPORTING AND STORING
We recommend draining both boilers
completely before transporting the machine
or storing for an extended period of time.
This procedure is also intended as an
anti-freeze measure in the event the machine
is exposed to extreme cold temperatures.
Loading ...
Loading ...
Loading ...