Loading ...
Loading ...
Loading ...
28
PAGE HEADER.....
CARE & CLEANING
CLEANING CYCLE
• CLEAN ME! will be displayed on
the LCD to indicate when a cleaning cycle
is required (after approx. 200 shots). The
cleaning cycle cleans the shower screen
and back-flushes the group head.
• Insert the supplied grey silicone cleaning
disc, followed by 1 cleaning tablet into the
filter basket.
• Lock the portafilter into the group head.
• Ensure the water tank is filled with cold
water and the drip tray is empty.
• Press the MENU button and rotate
SELECT dial until 'CLEAN CYCLE' and
'PUSH' are displayed on the LCD.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
MENU
EXIT
• Press the SELECT dial to start the
cleaning cycle.
• The LCD will display a countdown timer
showing remaining time for the cleaning
cycle in seconds.
• When the cleaning cycle has finished,
remove the portafilter and ensure the
tablet has completely dissolved. If the
tablet has not dissolved, repeat these
steps, without inserting a new tablet.
• Rinse the filter basket and portafilter
thoroughly before use.
• Extract an espresso to "season" the
machine and purge the system of
any remaining cleaner.
INSTALLING THE WATER FILTER
• Discard the used water filter. Soak a new
filter in a cup of water for 5 minutes, then
rinse under cold running water.
• Wash the filter holder with cold water,
taking specific care to rinse the stainless
steel mesh.
• Insert the filter into the two parts of the
filter holder.
• To install the assembled filter holder into
the water tank, align the base of the filter
holder with the adapter inside the water
tank. Push down to lock into place.
• Fill the water tank with cold water before
sliding back into position at the back of the
machine and locking into place.
NOTE
Visit www.breville.com.au or call Breville
Customer Service Centre to purchase
water filters.
Loading ...
Loading ...
Loading ...