Loading ...
Loading ...
Loading ...
32
1 – Prepare for Descale
a) Empty the drip tray and insert into
position.
b) With the machine off, press and hold the
1 CUP button, then press and hold the
POWER button together for 3 seconds.
rSEt will appear on the LCD.
POWER
THEN PRESS
& HOLD
c) Rotate SELECT dial until ‘dESc” appears
on LCD and press the dial to confirm.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
2 – Empty Boilers
a) Remove the grey silicone cover on the
lower front panel marked DESCALE
ACCESS.
REMOVE
CARE & CLEANING
b) Place a cloth over the drip tray to prevent
steam escaping.
c) Use a flat head screw driver to rotate the
right valve counter-clockwise SLOWLY
until fully open. As the valve opens, steam
may be released.
When the water is completely empty, close
the valve by rotating screws clock-wise
until sealed. Do not overtighten screws to
avoid damage to the valves.
d) Repeat the above process on the left valve.
NOTE
If there’s no water released into the drip
tray from the left valve when it is opened,
press and hold the 1 CUP button for
3 seconds. This will release water from the
coffee boiler.
e) Empty the drip tray, use caution as the drip
tray may be hot.
f) Empty water tank, remove water filter.
Loading ...
Loading ...
Loading ...