Loading ...
Loading ...
Loading ...
Appliance settings en
43
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Note: Ensure that the Home Connect
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.siemens-home.bsh-group.com
among the additional documents on the
product page for your appliance.
2.4 GHz band: max. 100 mW
Q Appliance settings
Appli ance settings
Automatic switch-off
If the appliance is not operated for a
prolonged period (at least 20 minutes,
depending on the water level inside of
appliance), it will automatically switch
off before the programme starts or after
the programme has ended. Press the
power button # again to switch on the
appliance.
Note: If Wi-Fi is switched on at the
appliance, when it is in Energy saving
mode, the appliance will not
automatically switch itself off.
Basic settings
To access the basic settings, touch and
hold the ç button for approx. 3
seconds. The control panel show:
You can change the following basic
settings:
■ The volume of the end signal.
■ The volume of the buttons.
■ The brightness of the Touch-Display.
■ Switching the drum care information
signal on/off.
End signal
Touch and hold the ç button for
approx. 3 seconds. The indicator lamp
in position 1 is on. You can use the ˜
button to adjust the volume of the end
signal, e.g. ‘- ‚.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
#
#
Loading ...
Loading ...
Loading ...